References

2004 Standard For Performance Rating Of Positive Displacement Refrigeration Compressor Units. ANSI/AHRI Standard 540. Arlington, VA: Air-Conditioning, Heating, and Refrigeration Institute.
2007 Standard for Performance Rating of Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment. ANSI/AHRI Standard 340/360-2007 with Addenda 1 & 2. Arlington, VA: Air-Conditioning, Heating, and Refrigeration Institute.
2008 Standard for Performance Rating of Unitary Air-Conditioning & Air-Source Heat Pump Equipment. ANSI/AHRI Standard 210/240 with Addendum 1. Arlington, VA: Air-Conditioning, Heating, and Refrigeration Institute.
2010 Standard for Performance Rating of Variable Refrigerant Flow (VRF) Multi-Split Air-Conditioning and Heat Pump Equipment. ANSI/AHRI Standard 1230 with Addendum 1. Arlington, VA: Air-Conditioning, Heating, and Refrigeration Institute.
2011 Standard for Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets for Use with Secondary Refrigerants. ANSI/AHRI Standard 1320 (I-P). Arlington, VA: Air-Conditioning, Heating, and Refrigeration Institute.
2011 Standard for Performance Rating of Water-Chilling and Heat Pump Water-Heating Packages Using the Vapor Compression Cycle. ANSI/AHRI Standard 550/590 (I-P) with Addendum 1. Arlington, VA: Air-Conditioning, Heating, and Refrigeration Institute.
2013 Standard for Performance Rating of Commercial Heat Pump Water Heaters. AHRI Standard 1301. Arlington, VA: Air-Conditioning, Heating, and Refrigeration Institute.
American National Standard for Electric Lamps—Nomenclature for Glass Bulbs Intended for Use with Electric Lamps. ANSI C79.1-2002. Rosslyn, VA: National Electrical Manufacturers Association.
American National Standard for Lamp Ballasts—Ballasts for High Intensity Discharge (HID) Lamps – Methods of Measurement. ANSI C82.6-2005. Rosslyn, VA: National Electrical Manufacturers Association.
American National Standard For Lamp Ballasts—Definitions—for Fluorescent Lamps and Ballasts. ANSI C82.13-2002. Rosslyn, VA: National Electrical Manufacturers Association.
American National Standard for Lamp Ballasts—Method of Measurement of Fluorescent Lamp Ballasts. ANSI C82.2-2002. Rosslyn, VA: National Electrical Manufacturers Association.
American National Standard for Rotodynamic (Centrifugal) Pumps for Design and Application. ANSI/HI 1.3-2009. Parsippany, NJ: Hydraulic Institute.
American National Standard for Rotodynamic Pumps for Hydraulic Performance Acceptance Tests. ANSI/HI 14.6-2011. Parsippany, NJ: Hydraulic Institute.
ANSI/UL 1703-2004 Standard for Flat-Plate Photovoltaic Modules and Panels. Northbrook, IL: American National Standards Institute and Underwriters Laboratories Inc. ISBN 0-7629-0760-6.
Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products. IESNA LM-79-08. New York, NY: Illuminating Engineering Society of North America.
Approved Method: Measuring Lumen Maintenance of LED Light Sources. IESNA LM-80-08. New York, NY: Illuminating Engineering Society of North America.
Burch, Jay and Erikson, Paul. Using Ratings Data to Derive Simulation-Model Inputs for Storage-Tank Water Heaters. Portland, Oregon : s.n., 2004. Proceedings of the 29th Passive Solar Conference. pp. 393-398.
Designation and Safety Classification of Refrigerants. ANSI/ASHRAE Standard 34-2010. Atlanta, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers.
EnergyPlus Input Output Reference, The Encyclopedic Reference to EnergyPlus Input and Output. October 6, 2012. Washington, DC: US Department of Energy.
EnergyPlus Input Output Reference, The Encyclopedic Reference to EnergyPlus Input and Output. April 1, 2013. Washington, DC: US Department of Energy.
EnergyPlus Input Output Reference, The Encyclopedic Reference to EnergyPlus Input and Output. November 26, 2013. Washington, DC: US Department of Energy.
Energy Conservation Program: Test Procedure for Commercial Refrigeration Equipment. 2014. Federal Register. Vol. 79, No. 76. Washington, DC: US Department of Energy.
Faramarzi, R., Sarhadian, R., Sweetser, R. S. Assessment of Indoor Relative Humidity Variations on the Energy Use and Thermal Performance of Supermarkets’ Refrigerated Display Cases. 2000. Commercial Buildings: Technologies, Design, and Performance Analysis.
Food Service and General Commercial Refrigeration Equipment. 2014 ASHRAE Handbook: Refrigeration. Atlanta, GA: American Society of Heating, Refrigeration, and Air-Conditioning Engineers, Inc.
IEC 60904-3 Ed 2.Photovoltaic Devices- Part 3L Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data. 2008. International Electrotechnical Commission.
IEC 61215 Ed 2. Crystalline silicon terrestrial photovoltaic (PV) modules- Design qualification and type approval. 2005. International Electrotechnical Commission.
IEC 61646 Ed 2.Thin-film terrestrial photovoltaic (PV) modules- Design qualification and type approval. 2008. International Electrotechnical Commission.
IEC 61853-1Ed 1. Photovoltaic (PV) Module Performance Testing and Energy Rating- Part 1: Irradiance and temperature performance measurements and power rating. 2010. International Electrotechnical Commission.
IEEE Recommended Practice for Establishing Liquid-Filled and Dry-Type Power and Distribution Transformer Capability When Supplying Non-sinusoidal Load Currents. IEEE Std. C57.110-2008. New York, NY: Institute of Electrical and Electronics Engineers.
IEEE Standard General Requirements for Dry-Type Distribution and Power Transformers, Including Those with Solid-Cast and/or Resin Encapsulated Windings. IEEE Std. C57.12.01-2005. New York, NY: Institute of Electrical and Electronics Engineers.
IEEE Standard Test Code for Dry-Type Distribution and Power Transformers. IEEE Std. C57.12.91-2011. New York, NY: Institute of Electrical and Electronics Engineers.
King, D. L., Boyson, W. E., Kratochvil, J. A. Photovoltaic Array Performance Model. August 2004. Albuquerque, New Mexico: Sandia National Laboratories. URL: http://www.mauisolarsoftware.com/MSESC/The%20Sandia%20Peformance%20Model.pdf
King, D. L., Kratochvil, J. A., Boyson, W. E. Temperature Coefficients for PV Modules and Arrays: Measurement Methods, Difficulties, and Results. 1997. Albuquerque, NM: Sandia National Laboratories. URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=654300
Mennie, H. D., ed. IESNA Lighting Ready Reference, Fourth Edition. A Compendium of Materials From The IESNA Lighting Handbook, 9th Edition. New York, NY: Illuminating Engineering Society of North America, 2003.
Mermoud, André and Lejeune, Thibault. Partial Shadings on PV Arrays: By-Pass Diode Benefits Analysis. 2010. Carouge – Switzerland: Institute for the Sciences of Environment / Group of Energy, University of Geneva. URL: http://www.cuepe.ch/html/biblio/pdf/Shadings_Article_Valence2010.pdf
Method to Determine Efficiency of Commercial Space Heating Boilers. BTS – 2000 Testing Standard. Berkeley Heights, NJ. The Hydronics Institute Division of the Air-Conditioning, Heating, and Refrigeration Institute.
Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers. ANSI/ASHRAE 103-2007. Atlanta, GA: American Society of Heating, Refrigerating, and Air-Conditioning Engineers.
Method of Testing Commercial Refrigerators and Freezers. ANSI/ASHRAE Standard 72-2005. Atlanta, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
Methods of Testing for Rating the Performance of Positive Displacement Refrigerant Compressors and Condensing Units that Operate at Subcritical Temperatures of the Refrigerant. ANSI/ASHRAE Standard 23.1-2010. Atlanta, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers.
NEMA Standards Publication TP-2 2005: Standard Test Method for Measuring the Energy Consumption of Distribution Transformers. Rosslyn, VA: National Electrical Manufacturers Association.
PVsyst 6 Help. URL: http://files.pvsyst.com/help/index.html?sandia_model.htm
Standard File Format for Electronic Transfer of Photometric Data and Related Information (Reaffirmed 2008). IESNA LM-63-02. New York, NY: Illuminating Engineering Society of North America.
System Advisor Model (SAM) Help. 2013. National Renewable Energy Laboratory. Photovoltaic Systems: Flat Plate PV: Module.